The coating process
Done right, a silicon nanocoat will redefine how your car looks and performs under harsh weather.
Learn how to achieve the result:
CQ.UK 3.0
Precautions
– Do not apply in direct sun or on hot surface
– Do not re-use 4″ Suede applicators
– Do not re-use the towels you used to buff off with on paint
– Wear hand protection
– Wear respiratory protection such as painters mask
Shake CQuartz before use.
Wrap a 4" microfiber suede around the grey side of applicator block. Slowly open bottle and drag one or two lines of product down the applicator.
Spread across paint in a criss cross pattern approximately 50cm x 50cm at a time depending on conditions.
Buff off as soon as it flashes (within 1-2 minutes depending) using a CarPro No Lint Ultra Towel 16" x 16". Be sure to remove all excess residue and only then do you move to the next section.
Switch out the 4" Suedes every 2+/- panels. Additional coats may be applied after 60 minutes or wait until the following day if you are beyond 60 minutes. CarPro recommends 2 coats. Max Layer - 3 coats.
Apply Reload after final coat after 60 mins. Wait until next day for Reload if you miss the 60 minute window or at least a minimum of 12 hrs.
User product manuals
CQUARTZ |
Ceramic quartz paint protection / Instruction manual |
27.03.2019 | Download | |
CQ.UK |
Ceramic quartz paint protection / Instruction manual |
27.03.2019 | Download | |
DLUX |
Plastic & Wheel Coating / Instruction manual |
27.03.2019 | Download | |
FlyBy30 |
Windshield rain repellent treatment / Instruction manual |
27.03.2019 | Download | |
FlyByFORTE |
Extreme windshield & glass coating / Instruction manual |
27.03.2019 | Download | |
Gliss |
Hyper slick top coating / Instruction manual |
27.03.2019 | Download | |
Leather |
Extreme stain & dye transfer protection / Instruction manual |
27.03.2019 | Download | |
Skin |
PPF and vinyl wrap coat / Instruction manual |
27.03.2019 | Download | |
CQUARTZ Lite |
Entry-level coating based on CQ.UK technology |
3.05.2019 | View product | Download |